How To Jump Start Your Car

 READING THE WARNING BEFORE USING!

1. Recommended that eye protection be worn when jump starting a vehicle.

2. Accidents can occur, in the event that an accident might occur whereby any acid or foreign matter

comes in contact with eyes, skin or clothing and contamination should occur, the foreign matter must be

 immediately flushed from the eyes, skin or clothing. Contact a physician immediately.

3. Vehicles should not touch in order to limit any potential sparks.

4. If the batteries have vents or caps place a cloth over them in order to discourage the formation of harmful gases. DO NOT SMOKE.

5. Consult your vehicle owner's manual for jump instructions.

GENERAL INSTRUCTION FOR USE

1. Carefully connect one red position (+) cable end to the position (+) post of the dead battery.

2. Carefully connect the other position (+) cable end to the good battery.

3. Connect one of the negative (-) post of good battery.

4. Connect the other negative (-) end to an engine ground. (not the negative battery post). Consult your vehicle's owner's manual.

5. Avoid all moving parts.

6. Stop back from vehicle being jumped. Start the boosting vehicle first and then engage the starter on the dead vehicle. Do not engage for an extended period of time.

7. For vehicles with a computer system, it is advisable to turn on the high beam lights to avoid a voltage surge and to protect the vehicle's electrical system. Consult your vehicle's owner's manual or contact your local automobile dealers.

8. After starting, carefully remove the cables in the reverse order.